Battistini Srl
Seriousness as working principle

The quality of work performed together with the constant respect of the delivery deadlines make Battistini a point of reference in the local industrial landscape. Reputation earned through several years of commitments, of satisfied customers and loyalty acquired.

About us

Rely on those who do their job well since many years.

Battistini Srl has been leader in grinding, milling and reaming for over 40 years

Grinding

The adjustment procedure is performed with a machine called a grinding machine, which has a grinding tool, fine-grained and extremely hard. The adjustment is used to bring any component in the shape or surface optimal to the project; this operation follows roughing. While the roughing removes the bulk of the residues, rectification causes all the residues or excess material being removed by providing to the machined surface a high degree of finish. It is an expensive operation, therefore should be performed only where it is necessary a high degree of finishing (such as seats of bearings and gear profiles).

Milling

Milling is a cold mechanical machining by chip removal; the operation is performed by a tool that rotates around its own axis on a workpiece in forward motion. In order to achieve the finished piece is necessary that this can be inscribed in the piece starting from which the allowance will be removed.

Milling

Milling is a cold mechanical machining by chip removal; the operation is performed by a tool that rotates around its own axis on a workpiece in forward motion. In order to achieve the finished piece is necessary that this can be inscribed in the piece starting from which the allowance will be removed.

Reaming

Reaming is a mechanical process to correct slightly the alignment and the diameter of the holes, called bore, previously made with the drill. It is performed by hand with reamers mounted on tap wrenches or machine with the boring machine. The rotary motion of the reamer increases the diameter of the hole and brings it slowly to the correct value, possibly by changing the position of the axis. To bore cylindrical holes and conical tool it is given a translational motion parallel to the axis.